600 products

600 products

Safety Products

600 products

Set Ascending Direction Set Descending Direction
  1. M12-C02 M12-5 male screw connector
    2TLA020055R1100
    ₹822.00
    Straight M12-5 male connector with cable screw connection. Cable diameter range 2.5–6.5 mm. Learn More
  2. Safety Relay RT9 24DC
    2TLA010029R0000
    ₹15,132.00
    A universal safety relay for many safety applications. Relay outputs 2NO Learn More
  3. Universal safety relay/timer Sentry USR10 24VDC - 24 2H No unit - 3 NO + 1 NC - Multifunction - 0 ... 999 seconds
    2TLA010070R0000
    ₹17,450.00
    USR10 is a universal safety relay/safety timer with delayable relay outputs, 3 NO +1 NC, and a +24 VDC power supply. USR10 is used with safety devices with contacts, 1 or 2 channels , safety devices with OSSD outputs, two-hand devices, safety mats and safety edges/bumpers. USR10 offers 0-999 seconds timer functions with a better accuracy than 1%: OFF-delay, ON-delay, Time bypass and Time reset. A display on its front facilitate configuration and troubleshooting by displaying error codes and error log. A custom configuration can be protected by password. The reset function is selectable between Automatic and Manual. Learn More
  4. Eva General code
    2TLA020046R0800
    ₹1,685.00
    Eva actuator with general code for use with Adam DYN/OSSD sensors in the Eden sensor system, IP69K, yellow, 4pcs of DA 2B spacer rings are included. Learn More
  5. Smile 12 EA Tina
    2TLA030050R0200
    ₹5,608.00
    Emergency stop button in Smile enclosure, Tina adaptation unit to DYNlink included, Status LED in button, 1 x M12 5-pin male connector and 1 x M12 5-pin female connector. Learn More
  6. Safety Relay RT6 24DC
    2TLA010026R0000
    ₹18,210.00
    A universal safety relay for many safety applications. Relay outputs 3NO/1NC Learn More
  7. MKey8M 24VDC, power to lock, IP67
    2TLA050013R0132
    ₹27,753.00
    Safety interlock switch, die cast housing and head, 3xM20 conduits entries, +24VDC power to lock. Delivered with standard key. Learn More
  8. Smile 11 EA
    2TLA030051R0000
    ₹6,356.00
    Emergency stop button in Smile enclosure, 2 x NC, Status LED in button, 1 x M12 5-pin male connector. Learn More
  9. Smile 11 EA Tina
    2TLA030050R0000
    ₹7,323.00
    Emergency stop button in Smile enclosure, Tina adaptation unit to DYNlink included, Status LED in button, 1 x M12 5-pin male connector. Learn More
  10. Tina 1A Blind plug for DYNlink
    2TLA020054R0000
    Out of stock
    Tina 1A blind plug is connected to the unused M12 connectors of the connection blocks Tina 4A or Tina 8A. M12-5 male connector. Learn More
  11. Tina 4A Connection block 4 DYNlink M12-5
    2TLA020054R0300
    Out of stock
    Connection block for series connection of up to 4 DYNlink devices. Four M12-5 female connectors for the devices. The information signal of each device can be wired separately. The cable used for the connection to the Tina 4A should have a diameter 7 - 12 mm. If less than a devices are connected, complete with Tina 1A blind plugs. Learn More
  12. JSHD4H2 3-pos device panel mounting. 6x1200mm leads.
    2TLA020002R4500
    Out of stock
    JSHD4H2 Three-position control device for internal panel mounting. 6x1200mm leads. Learn More
  13. M12-CANend termination resistor encoder
    2TLA020061R0300
    Out of stock
    M12-5 plug with Pluto safety bus termination resistor for encoders. To be used when the encoder is at one end of the Pluto safety bus. Learn More
  14. JSHD4 Bottom part AL with JSM 53A
    2TLA020005R2000
    Out of stock
    Bottom part with JSM 53A and cable gland Learn More
  15. JSTD1-C Safeball 10m cable
    2TLA020007R3200
    Out of stock
    JSTD1-C Safeball, 1NO + 1NC, 10 m cable (4 leads). Ergonomic design with several grip possibilities and low activation force (approx. 2N) and flexible mounting options. Provides highest level of safety for use in two hand control applications when using two Safeballs in conjunction with appropriate safety relay or Pluto Safety PLC. Maximum load of 30VDC, 2A resistive, IP67 protection degree, plastic body. Learn More
  16. C13 cable (11x0.51 + 2x0.82) shielded
    2TLA020057R2000
    Out of stock
    Cable 11 x 0.51 mm2 + 2 x 0.82 mm2 + screen, specify length. Recommended to use with a Tina 8A. Learn More
  17. Tina 3A Adapter 2 contacts M12-5
    2TLA020054R0200
    Out of stock
    Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 3A is mounted directly on the device enclosure to a M20 cable entry and has a M12-5 male connector for connection to the DYNlink loop. Learn More
  18. JSHD4H2 3-pos device panel mounting. 6x150mm leads.
    2TLA020002R3100
    Out of stock
    JSHD4H2 Three-position control device for internal panel mounting. 6x150mm leads. Learn More
  19. JSHK1-B Male plug for cable
    2TLA020003R0900
    Out of stock
    12-pole male Cannon connector for cable mounting. Learn More
  20. JSHD4-4-AH-A Enabling Switch
    2TLA019995R3100
    Out of stock
    Three-position device. Top part with LEDs and front button. Bottom part with cable gland and PCB with 10 screw connection and anti-tamper PCB. Learn More
  21. JSHD4-2-AD Enabling Switch
    2TLA019995R0400
    Out of stock
    Three-position device. Top part with LEDs, front button and top button. Bottom part with M12-8 connector. Learn More
  22. M12-C103 10 m cable M12-8 female conn.
    2TLA020056R4000
    Out of stock
    10 m cable 8 x 0.34 mm2 + shield with straight M12-8 female connector. Learn More
  23. Tina 2A Adapter 2 contacts
    2TLA020054R0100
    Out of stock
    Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 2A is mounted directly on the device enclosure to a M20 cable entry. Learn More
  24. INCA 1S Safety Stop
    2TLA030054R0300
    Out of stock
    Safety stop (black button) for panel mounting, 22.5 mm holes, 2 NC contacts, status LED in button, terminal blocks. Learn More
  25. M12-3S M12 Y-connector
    2TLA020055R0600
    Out of stock
    M12-3S M12 Y-connector for series connection of DYNlink devices with the StatusBus function. One M12-5 pole female connector (#2) for connection of the safety device, one M12-5 male connector (#1) for connection of +24VDC, 0V, the incoming dynamic signal and the StatusBus and one M12-5 female connector (#3) for the outgoing inverted dynamic signal towards another safety device or Vital/Pluto safety PLC. Learn More
  26. M12-C101 10m cable M12-5 female conn.
    2TLA020056R1000
    Out of stock
    10 m cable 5 x 0.34 mm2 + shield with straight M12-5 female connector. Learn More
  27. Adam OSSD-Reset M12-5 connector
    2TLA020051R5600
    Out of stock
    Adam safety sensor unit with OSSD signals and reset with indication. M12-5 male connector, IP69K, yellow. 4pcs of DA 1B distance plates and 4pcs of DA 2B distance rings are included. Learn More
  28. Adam OSSD-Info M12-5 connector
    2TLA020051R5400
    Out of stock
    Adam safety sensor unit with OSSD signals and information output. M12-5 male connector, IP69K, yellow. 4pcs of DA 1B distance plates and 4pcs of DA 2B distance rings are included. Learn More
  29. LineStrong3D, 4NC/4NO, M20 ESTOP/LED
    2TLA050204R0332
    Out of stock
    Emergency stop grab wire safety switch, 4NC + 4NO, Entries from both sides of the grab wire switch, Up to 250m length, yellow die cast housing, LED status indication, Conduit entry 3xM20 Learn More
  30. Adam DYN-Reset M12-5 connector
    2TLA020051R5300
    Out of stock
    Adam safety sensor unit with DYNlink signal and reset with indication. M12-5 male connector, IP69K, yellow. 4pcs of DA 1B distance plate and 4pcs of DA 2B distance rings are included. Learn More
No more product
No more product
© ABB India Ltd. | Address: 88/3-88/6, Basavanahalli Village, Kasaba Hobli, Bengaluru, Karnataka - 562123