-
SA/S12.6.2.2 Switch Actuator, 12-fold, 6 A, MDRC2CDG110256R0011₹47,493.00The switch actuator uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus® KNX. The device features a manual operation and displaying of the switching state of the outputs. The 6 A device is especially suited to switch resistive, inductive or capacitive loads. The device is powered by KNX and requires no additional power supply. Learn More
UD/S4.210.2.1 LED dimmer 4 x 210 W/VA 1-4 fold2CKA006197A0047₹44,891.00Multichannel universal dimming actuator optimised for dimming retrofit LED lamps (LEDi). Also suitable for dimming incandescent lamps, low-voltage halogen lights with conventional or electronic transformers, 230 V halogen lamps and dimmable energy-saving halogen lamps. Automatic load detection (can be deactivated). Separate N-connection per channel. Parallel connection of the outputs possible to increase the output power. Outputs can be connected in parallel in any configuration. Minimum load: 2 W. Manual operation on device also possible without bus voltage or in an unprogrammed status. Programming of the device also possible without applied 230V supply voltage. Extensive test and diagnosis functions for the i-Bus tool. Fast parameter setting in ETS using copyable channel templates. With integrated bus coupler. Nominal power at 230 V~ mains voltage: 230 V~ incandescent and halogen lamps: 4 x 210 W/VA to 1 x 600 W/VA. Dimmable 230 V~ LEDi: 4 x 210 W/VA to 1 x 600 W/VA in trailing edge control, 4 x 80 W/VA to 1 x 200 W/VA in leading edge control. Inductive L-transformers with LED/low-voltage halogen lamp: 4 x 210 W/VA to 1 x 600 W/VA. Electronic C-transformers with LED/low-voltage halogen lamp: 4 x 210 W/VA to 1 x 600 W/VA. Electronic LC-transformers with LED/low-voltage halogen lamp: 4 x 80 W/VA to 1 x 200 W/VA. Learn More
LK/S4.2 Line Coupler, MDRC2CDG110171R0011₹41,737.00The ABB i-bus® KNX Line Coupler LK/S 4.2 is a modular installation device with a module width of 2 space units. It is used as a line or area coupler or as a repeater. As a line coupler, the LK/S connects a line with a main line, as an area coupler it connects a main line with an area line. It provides electrical isolation in this way. In connection with ETS4, the main groups 14...31 can be filtered. Learn More
SA/S8.6.2.2 Switch Actuator, 8-fold, 6 A, MDRC2CDG110255R0011₹38,232.00The switch actuator uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus® KNX. The device features a manual operation and displaying of the switching state of the outputs. The 6 A device is especially suited to switch resistive, inductive or capacitive loads. The device is powered by KNX and requires no additional power supply. Learn More
JRA/S4.230.2.1 Blind/Roller Shutter Act, 4-f, 230 V AC, Manual Operation, MDRC2CDG110121R0011₹33,665.00For the control of independent 230 V AC drives via ABB i-bus® KNX. The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed. To protect the drives, the output contacts are electromechanically locked against each other. Push buttons are located at the front of the device to control the outputs e.g. during commissioning. The current status of the output is displayed via LEDs. Learn More
IPS/S3.1.1 IP Interface, MDRC2CDG110177R0011₹30,947.00Connects the KNX bus with the Ethernet network. The device uses the KNXnet/IP protocol for communication (Tunneling). KNX devices can be programmed via the LAN using ETS. For this and further clients 5 Tunneling Server are available. The IP address can be fixed or can be received from a DHCP server. Power supply via 12..30 V DC or PoE. Learn More
SV/S30.320.1.1 Power Supply, 320 mA, MDRC2CDG110166R0011₹29,067.00KNX power supplies 320 mA generate and monitor the KNX system voltage (SELV). The bus line is decoupled from the power supply by an integrated choke. The voltage output is short-circuit and overload protected. The two-color LED indicates device output status. With two-coloured status indicator and wide range input from 85…265 V AC, 50/60 Hz. Learn More
USB/S1.2 USB Interface, MDRC2CDG110243R0011₹27,580.00Connects the KNX installation with PC software clients such as ETS or visualisations (programming, bus monitor, group monitor). The device supports Long Frames which allows faster download and download of KNX Secure devices. Learn More
JRA/S2.230.2.1 Blind/Roller Shutter Act, 2-f, 230 V AC, Manual Operation, MDRC2CDG110120R0011₹24,044.00For the control of independent 230 V AC drives via ABB i-bus® KNX. The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed. To protect the drives, the output contacts are electromechanically locked against each other. Push buttons are located at the front of the device to control the outputs e.g. during commissioning. The current status of the output is displayed via LEDs. Learn More
US/U4.2 Universal Interface, 4-fold, FMGHQ6310070R0111₹10,694.00The Universal Interface has 4 channels which can be parameterised as inputs or outputs, e.g. for connection of conventional push-buttons, auxiliary contacts, LEDs and electronic relays ER/U 1.1. Requires ETS2 V1.2a. Learn More
US/E1 Connection Terminal with Surge ArresterGHQ6310009R0001₹7,540.00For connecting bus devices as well as for looping through or branching the bus cable. In blue as bus connecting terminal with surge protector. Learn More
US/U2.2 Universal Interface, 2-fold, FMGHQ6310074R0111₹6,478.00The Universal Interface has 2 channels which can be parameterised as inputs or outputs, e.g. for connection of conventional push-buttons, auxiliary contacts, LEDs and electronic relays ER/U 1.1. Requires ETS2 V1.2a. Learn More
M20381 Video 1 family kit, mini OS, 1 button + 4.3" video handsfree2TMA070140N0089Out of stockVideo 1 family kit, mini OS, 1 button + 4.3" video handsfree Learn More
M20353 Video 1 family IPGW-Kit, mini OS, 1 button + IP-Gateway, without indoor station,2TMA210310N0002Out of stockVideo 1 family IPGW-Kit, mini OS, 1 button + IP-Gateway, without indoor station Learn More
Kit includes 1 pc GF5S70-C color outdoor station+ 1 pc GF3110(7"TFT) acrylic color indoor station(grey color)+ 1 pc PS-4WD power supply(British standard plug/socket type)2TMA040140N0019Out of stockKit includes 1 pc GF5S70-C color outdoor station+ 1 pc GF3110(7"TFT) acrylic color indoor station(grey color)+ 1 pc PS-4WD power supply(British standard plug/socket type) Learn More© ABB India Ltd. | Address: Disha - Plot No.5 & 6, 2nd Stage, Peenya Industrial Area IV, Peenya 560058, Bangalore, Karnataka, India.
Genuine products
Dedicated Support
Doorstep Delivery
Skip to Content
- Create an Account