734 products

734 products

Safety Products

734 products

Set Ascending Direction Set Descending Direction
  1. Tina 1A Blind plug for DYNlink
    2TLA020054R0000
    out of stock
    Tina 1A blind plug is connected to the unused M12 connectors of the connection blocks Tina 4A or Tina 8A. M12-5 male connector. Learn More
  2. Tina 4A Connection block 4 DYNlink M12-5
    2TLA020054R0300
    out of stock
    Connection block for series connection of up to 4 DYNlink devices. Four M12-5 female connectors for the devices. The information signal of each device can be wired separately. The cable used for the connection to the Tina 4A should have a diameter 7 - 12 mm. If less than a devices are connected, complete with Tina 1A blind plugs. Learn More
  3. JSHD4H2 3-pos device panel mounting. 6x1200mm leads.
    2TLA020002R4500
    out of stock
    JSHD4H2 Three-position control device for internal panel mounting. 6x1200mm leads. Learn More
  4. M12-CANend termination resistor encoder
    2TLA020061R0300
    out of stock
    M12-5 plug with Pluto safety bus termination resistor for encoders. To be used when the encoder is at one end of the Pluto safety bus. Learn More
  5. JSHD4 Bottom part AL with JSM 53A
    2TLA020005R2000
    out of stock
    Bottom part with JSM 53A and cable gland Learn More
  6. Smile 12 SA
    2TLA030051R1000
    out of stock
    Machine stop(Black button) in Smile enclosure, 2 x NC, Status LED in button, 1 x M12 5-pin male connector and 1 x M12 5-pin female connector. Learn More
  7. JSTD1-C Safeball 10m cable
    2TLA020007R3200
    out of stock
    JSTD1-C Safeball, 1NO + 1NC, 10 m cable (4 leads). Ergonomic design with several grip possibilities and low activation force (approx. 2N) and flexible mounting options. Provides highest level of safety for use in two hand control applications when using two Safeballs in conjunction with appropriate safety relay or Pluto Safety PLC. Maximum load of 30VDC, 2A resistive, IP67 protection degree, plastic body. Learn More
  8. C13 cable (11x0.51 + 2x0.82) shielded
    2TLA020057R2000
    out of stock
    Cable 11 x 0.51 mm2 + 2 x 0.82 mm2 + screen, specify length. Recommended to use with a Tina 8A. Learn More
  9. Tina 3A Adapter 2 contacts M12-5
    2TLA020054R0200
    out of stock
    Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 3A is mounted directly on the device enclosure to a M20 cable entry and has a M12-5 male connector for connection to the DYNlink loop. Learn More
  10. JSHD4H2 3-pos device panel mounting. 6x150mm leads.
    2TLA020002R3100
    out of stock
    JSHD4H2 Three-position control device for internal panel mounting. 6x150mm leads. Learn More
  11. JSHK1-B Male plug for cable
    2TLA020003R0900
    out of stock
    12-pole male Cannon connector for cable mounting. Learn More
  12. JSHD4-4-AH-A Enabling Switch
    2TLA019995R3100
    out of stock
    Three-position device. Top part with LEDs and front button. Bottom part with cable gland and PCB with 10 screw connection and anti-tamper PCB. Learn More
  13. JSHD4-2-AD Enabling Switch
    2TLA019995R0400
    out of stock
    Three-position device. Top part with LEDs, front button and top button. Bottom part with M12-8 connector. Learn More
  14. M12-C103 10 m cable M12-8 female conn.
    2TLA020056R4000
    out of stock
    10 m cable 8 x 0.34 mm2 + shield with straight M12-8 female connector. Learn More
  15. Tina 2A Adapter 2 contacts
    2TLA020054R0100
    out of stock
    Adaptation of devices with 2 positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 2A is mounted directly on the device enclosure to a M20 cable entry. Learn More
  16. INCA 1S Safety Stop
    2TLA030054R0300
    out of stock
    Safety stop (black button) for panel mounting, 22.5 mm holes, 2 NC contacts, status LED in button, terminal blocks. Learn More
  17. M12-3S M12 Y-connector
    2TLA020055R0600
    out of stock
    M12-3S M12 Y-connector for series connection of DYNlink devices with the StatusBus function. One M12-5 pole female connector (#2) for connection of the safety device, one M12-5 male connector (#1) for connection of +24VDC, 0V, the incoming dynamic signal and the StatusBus and one M12-5 female connector (#3) for the outgoing inverted dynamic signal towards another safety device or Vital/Pluto safety PLC. Learn More
  18. M12-C101 10m cable M12-5 female conn.
    2TLA020056R1000
    out of stock
    10 m cable 5 x 0.34 mm2 + shield with straight M12-5 female connector. Learn More
  19. Adam OSSD-Reset M12-5 connector
    2TLA020051R5600
    out of stock
    Adam safety sensor unit with OSSD signals and reset with indication. M12-5 male connector, IP69K, yellow. 4pcs of DA 1B distance plates and 4pcs of DA 2B distance rings are included. Learn More
  20. Knox 1AX-R v2 out open, hings to right, man. Unlock
    2TLA020105R5800
    out of stock
    Knox door part for outward-opening door with hinges to the right. With the option for manual unlocking from the outside. Learn More
  21. Adam OSSD-Info M12-5 connector
    2TLA020051R5400
    out of stock
    Adam safety sensor unit with OSSD signals and information output. M12-5 male connector, IP69K, yellow. 4pcs of DA 1B distance plates and 4pcs of DA 2B distance rings are included. Learn More
  22. LineStrong3D, 4NC/4NO, M20 ESTOP/LED
    2TLA050204R0332
    out of stock
    Emergency stop grab wire safety switch, 4NC + 4NO, Entries from both sides of the grab wire switch, Up to 250m length, yellow die cast housing, LED status indication, Conduit entry 3xM20 Learn More
  23. Tina 10C Adapter OSSD+supply transmitter
    2TLA020054R1600
    out of stock
    Adaptation of devices with OSSD outputs, like light guards, to the DYNlink solution with possibility to power the transmitter. Tina 10C has one M12-5 male connector towards the DYNlink loop, one M12-8 female connector towards the OSSD device and one M12-5 female connector for the supply of the transmitter (0V and +24VDC) Learn More
  24. Adam DYN-Reset M12-5 connector
    2TLA020051R5300
    out of stock
    Adam safety sensor unit with DYNlink signal and reset with indication. M12-5 male connector, IP69K, yellow. 4pcs of DA 1B distance plate and 4pcs of DA 2B distance rings are included. Learn More
  25. JSHD4-4-AJ-A Enabling Switch
    2TLA019995R3300
    out of stock
    Three-position device. Top part with LEDs and front button. Bottom part with cable gland and PCB with 16 screw connections and anti-tamper PCB. Learn More
  26. Dalton bracket 5
    2TLA020039R0400
    out of stock
    Fixing plate for Dalton, small bracket for lock tongue. Learn More
  27. Knox Shear Pin
    2TLA020106R0800
    out of stock
    Knox outer handle. Spare part. Learn More
  28. JSTK50S Spiral cable 5m for JSTD25P-1
    2TLA020007R6800
    out of stock
    Spiral cable 5m for JSTD25P-1 Learn More
  29. JSHD4 Bottom part AH Cable Gland+PCB-10
    2TLA020005R1700
    out of stock
    Bottom part with cable gland and PCB with 10 screw connections Learn More
  30. Emergency Stop Sign, 32.5mm
    2TLA030054R1000
    out of stock
    Yellow surround for panel mounted emergency stop button, for 32.5 mm hole. Learn More
No more product
No more product
© ABB India Ltd. | Address: 88/3-88/6, Basavanahalli Village, Kasaba Hobli, Bengaluru, Karnataka - 562123